Lighting & control

DIN-Rail module with double PWM LED driver to stear 2 independent  dimmable LED lamps or one color temperature-controlled LED lamp. The external LED power supply voltage can range from 12 - 24 VDC. A monitored input chanel can be parameterized as an alarm, light control or regultion input.

Technical data:

• 32Bit ARM Cortex-M4 CMOS CPU, 256kB Flash /32kB RAM
• 2  PWM LED-Treiber für 12-24V/6A
• Monitored digital input for alarm, light or regulation functions
• IBB/S safety bus interface with AES encryption
• Supply with 11-28VDC / 50mA via IBB/S
• Dimensions  B22,5 x L98 xH56,5 mm

The double digital touch switch is an advanced version of the famous DIGIcontrol-TSx series. It includes also a temperature & humidity sensor and a “swipe function” for up/down and left/right command to steer shades, curtains or light scenes. A new mounting method allows easy installation and chromed secure ring closes the gap between glass and wall. Two supervised digital inputs can be used for door contact, alarm inputs, egress button or other useful functions. The light switch connects over the IBB/S high security bus, which supplies also the necessary power;

Technical Data:

• AES encrypted high security Bus (IBB/S) interface
• Free configurable double Touch-Switch
• 4 swipe key areas for up/down & left/right
• Configurable feedback LED
• High precision temperature & humidity sensor
• 2 supervised digital inputs
• Configurable feedback & alarm buzzer
• -TC2 Integrated „Coded Relay“ Interface for secure door control

Lampcontroller

• 2 x 0-10V control output
• 2 x relay switching off VAC when wanted illumination is 0
  so saving rest-power consumption
• 2 x general purpose monitored input
• ATS-IBB passive interface

DMX bus controller

• supports DMX512
• special support for E8DMX Led lights
• 2 bus lines, separatelly fused and switchable
• 2 general purpose monitored inputs
• for up to 60 E8DMX leds spots
• 180VA/24V powersupply to steer LEDs

AIpoint-Z22 features an isolated 230V power supply and two power relays 230V/6A. The relays could be configured as two individual NO relays or as one change over relay with a configurable break time. To minimise risk, a maximum on time or an offline status could be set. 1 monitored digital input (could be configured also as relay feedback) & I2C interface for Sensirion humidity and temperature sensor could be used for general purpose. Message routing support allows to extend the total RF range.

Technical Data:

• 32Bit ARM Cortex-M4 CPU, 1MB Flash, 128kB RAM  
• ZigBee 3.0 128/256 Bit AES encryption
• Frequence band ISM 2,4GHz
• Distance out door up to 60m, inside up to 30m to gateway or module
• 2x Relais 230VAC 6A
• 1x Power-Down Relay 230VAC 6A
• 1x monitored input
• 1x I2C für Sensirion temperature & humidity sensor
• Dimension Ø52 x H28mm for DIN-light switch box or on wall mounting

The DIGIcontrol-ZBI IBB/S to ZigBee coordinator  is a universal I/O gateway to extend the input and output capacity of ATS building systems with up to 30 high security RF modules. A total of 60 Digital Inputs, 60 Analog Inputs and 60 Outputs (relays, DALI, 0-10V & PWM) could be configured and assigned to max. 30 RF modules. Full support for V4 analogue reporting system with individual intervals for actual-, mean, min. & max value of each input.

Technical data:

• IBB/S to ZigBee 3.0 coordinator gateway for up to 30 RF-Modules with  a total of
  60 monitorted  inputs, 60 analogue inputs & 60 output channels
• V4 Analogue report systen support  
• 32Bit ARM Cortex-M4 CPU & XBee3 Module, 512kB Flash, 64kB SRAM  
• 128 Bit AES encryption  
• Frequence band: ISM 2,4GHz
• Supply voltaghe: 10-28VDC /60mA max.
• Range indoor up to 30m, outdoor up to 60m
• Configurable report intervall of 1, 5, 10, 15, 30 oder 60 minutes
• Dimension gateway Ø102 x 23mm

Double touch light switch with integrated BLS sensor gateway for RF coupling of up to 5 BLE battery-operated sensors for temperature / humidity measurement, water leak detection etc. with a range of up to 30m.
The new "swipe" functions (up / down & left / right) can be used to easily implement blind controls or other special functions. A simple assembly method allows a visually appealing wall connection by means of a chrome-plated safety frame.

Technical data:

• Light switch with hardened crystal glass surface
• Freely configurable switches & "swipe" functions with LED display
• Wireless gateway for up to 5 AIpoint sensor modules with up to 10 analog and 5 digital values
• Frequency band 2.402-2.480GHz
• Digital sensor for room temperature and humidity
• Configurable feedback and alarm buzzer
• 2 monitored inputs for alarm sensors and door status monitoring
• V4 analog reporting systems for air sensors
• IBB/S safety bus interface with AES encryption
• Dimensions: W82 x H82 x D8.5 mm

Double touch light switch with integrated air quality measurement. Today, high air quality is one of the most important tasks in modern building technology. Our newest member of the ATS light switch series has therefore integrated a digital VOC air quality sensor with a 3-color LED display in addition to temperature and humidity measurement. The new "swipe" functions (up / down & left / right) can be used to easily implement blind controls or other special functions. A simple assembly method allows a visually appealing wall connection by means of a chrome-plated safety frame.

Technical data:

• Light switch with hardened crystal glass surface
• Freely configurable switches & "swipe" functions with LED display
• Integrated Sensirion SGP40 VOC air quality sensor
• Tricolor LED for air quality display
• Digital sensor for room temperature and humidity
• Configurable feedback and alarm buzzer
• 2 monitored inputs for alarm sensors and door status monitoring
• V4 analog reporting systems for air sensors
• IBB/S safety bus interface with AES encryption    
• Dimensions: W82 x H82 x D8.5 mm